ergonet

<p>Ergonet Cache for WordPress is a free plugin developed by Ergonet srl, an Italian hosting company, to drastically improve the performance of a WordPress website by using a server-side page caching system (NGINX Cache or Varnish Cache).</p>
<h3>BENEFITS</h3>
<p>Using a server-side caching system increases your WordPress site’s performance by a minimum of 30% and up to 70%. Keep in mind that the actual improvement will also depend on your overall website optimization strategy.</p>
<h3>WHAT IS PAGE CACHE AND HOW DOES IT WORK?</h3>
<p>Page cache speeds up your website by storing the entire HTML of web pages directly on the web server, instantly serving them to visitors without needing to query the PHP server or the database again. Depending on your hosting plan, you can enable NGINX page cache (Equilibrio plan) or advanced RAM-based Varnish page cache (Progresso and Successo plans).</p>
<h3>COMPATIBILITY</h3>
<p>The Ergonet Cache plugin is compatible with all other website caching and optimization plugins, such as WP Rocket, W3 Total Cache, WO Optimize, etc.<br />
The Ergonet Cache plugin functions solely as a communication layer between WordPress and the cache system (Varnish or NGINX) installed on the WordPress hosting platform (any plan) and dedicated cloud hosting (Solo and Multidomain plans) offered by Ergonet, available for purchase at this link: https://www.ergonet.it/hosting/hosting-wordpress-valore<br />
A fundamental requirement for the plugin to work is enabling the caching system from the WebPanel (Ergonet client area available at https://webpanel.ergonet.it) by the user who purchased the shared or dedicated cloud hosting service.</p>
<h3>HOW THE PLUGIN WORKS</h3>
<p>Once the caching system is enabled from the Ergonet WebPanel and the Ergonet Cache plugin is installed and activated, it will work without any additional configuration.<br />
Cache resource updates<br />
Each time the webmaster updates a post or page, the plugin installed in WordPress will automatically delete the old cached version to prevent users from seeing outdated content.<br />
At the same time, the homepage cache will also be cleared to reflect any new articles available on it.<br />
Cache resource deletion<br />
Thanks to the automatic update and removal functionality, there is no need to manually clear the cache. Moreover, forcibly clearing the entire cache is discouraged, as it would remove all previously stored resources (pages, articles, etc.) that had been frequently accessed.<br />
On websites with a large amount of content, a full cache purge could also cause significant slowdowns due to WordPress needing to regenerate all requested pages or articles from scratch.</p>
<h3>WHAT IS NOT CACHED</h3>
<p>To ensure the plugin works efficiently, some resources and specific HTTP calls are never cached. These include:</p>
<ul>
<li>Any page, article/resource visited by a logged-in user.</li>
<li>Any page, article/resource where a no-cache header or similar is set.</li>
<li>All requests made to the WordPress backend.</li>
<li>All data submission requests (e.g., registration forms, contact forms, comments, etc.)</li>
</ul>
<h3>HOW TO CHECK IF CACHING IS WORKING</h3>
<p>The server-side cache system sets specific HTTP headers indicating whether the requested resource (link) is cached or not. To verify if your website is using the cache correctly, you must check for these HTTP headers.<br />
It’s essential to ensure you are logged out of the WordPress site you’re checking, as well as from any other WordPress site open in other browser tabs. The first step is therefore to log out from the WordPress admin area.<br />
Open the developer tools based on your browser:</p>
<p>For Firefox: Menu <span aria-hidden="true" class="wp-exclude-emoji">→</span> Browser Tools <span aria-hidden="true" class="wp-exclude-emoji">→</span> Browser Console</p>
<p>For Chrome: View <span aria-hidden="true" class="wp-exclude-emoji">→</span> Developer Options <span aria-hidden="true" class="wp-exclude-emoji">→</span> Developer Tools</p>
<p>Once the developer tools are open:</p>
<p>Select the “Network” tab<br />
In Firefox, choose the “HTML” sub-tab, in Chrome, choose “Doc”<br />
Refresh the website page<br />
Click on the first row showing the domain name or visited link (with status 200)</p>
<p>In the right-hand column, you’ll see the response headers. The last header refers to the cache:</p>
<h3>VARNISH CACHE HEADER</h3>
<p>X-VC-Cache: HIT = the resource (page) is present in cache and was served from the Varnish cache system. This means the caching system is working properly.<br />
X-VC-Cache: MISS = the resource (page) is NOT in cache and was generated by the WordPress application. This means the cache system was instructed by headers or custom rules not to serve the cached content to the visitor.</p>
<h3>NGINX CACHE HEADER</h3>
<p>x-cache-status: HIT or STALE = the resource (page) is present in cache and was served from the NGINX cache system. This means the caching system is working properly.<br />
x-cache-status: MISS = the resource (page) is NOT in cache and was generated by the WordPress application. This means the cache system was instructed by headers or custom rules not to serve the cached content to the visitor.</p>
<h3>ENABLING THE CACHING SYSTEM FROM THE WEBPANEL</h3>
<p>The NGINX caching system is enabled by default and doesn’t require any specific settings.<br />
To enable the Varnish caching system, we recommend checking the dedicated guide: https://docs.ergonet.it/gestione-hosting/impostazioni-cache-server/cache-varnish</p>


Ergonet Cache

Ergonet Cache for WordPress is a free plugin developed by Ergonet srl, an Italian hosting company, to drastically improve the performance of a WordPre …

Automattic

Donncha O Caoimh (a11n)

Mike Stott

Nauris

Mark (a11n)

Pete (a11n)

Adnan Haque (a11n)

Peter Petrov

<p>This plugin generates static html files from your dynamic WordPress blog.  After a html file is generated your webserver will serve that file instead of processing the comparatively heavier and more expensive WordPress PHP scripts.</p>
<p>The static html files will be served to the vast majority of your users:</p>
<ul>
<li>Users who are not logged in.</li>
<li>Users who have not left a comment on your blog.</li>
<li>Or users who have not viewed a password protected post.</li>
</ul>
<p>99% of your visitors will be served static html files. One cached file can be served thousands of times. Other visitors will be served custom cached files tailored to their visit. If they are logged in, or have left comments those details will be displayed and cached for them.</p>
<p>The plugin serves cached files in 3 ways (ranked by speed):</p>
<ol>
<li>Expert. The fastest method is by using Apache mod_rewrite (or whatever similar module your web server supports) to serve “supercached” static html files. This completely bypasses PHP and is extremely quick. If your server is hit by a deluge of traffic it is more likely to cope as the requests are “lighter”. This does require the Apache mod_rewrite module (which is probably installed if you have custom permalinks) and a modification of your .htaccess file which is risky and may take down your site if modified incorrectly.</li>
<li>Simple. Supercached static files can be served by PHP and this is the recommended way of using the plugin. The plugin will serve a “supercached” file if it exists and it’s almost as fast as the mod_rewrite method. It’s easier to configure as the .htaccess file doesn’t need to be changed. You still need a custom permalink. You can keep portions of your page dynamic in this caching mode.</li>
<li>WP-Cache caching. This is mainly used to cache pages for known users, URLs with parameters and feeds. Known users are logged in users, visitors who leave comments or those who should be shown custom per-user data. It’s the most flexible caching method and slightly slower. WP-Cache caching will also cache visits by unknown users if supercaching is disabled. You can have dynamic parts to your page in this mode too. This mode is always enabled but you can disable caching for known users, URLs with parameters, or feeds separately. Set the constant “DISABLE_SUPERCACHE” to 1 in your wp-config.php if you want to only use WP-Cache caching.</li>
</ol>
<p>If you’re not comfortable with editing PHP files then use simple mode. It’s easy to set up and very fast.</p>
<h3>Recommended Settings</h3>
<ol>
<li>Simple caching.</li>
<li>Compress pages.</li>
<li>Don’t cache pages for known users.</li>
<li>Cache rebuild.</li>
<li>CDN support.</li>
<li>Extra homepage checks.</li>
</ol>
<p>Garbage collection is the act of cleaning up cache files that are out of date and stale. There’s no correct value for the expiry time but a good starting point is 1800 seconds.</p>
<p>Consider deleting the contents of the “Rejected User Agents” text box and allow search engines to cache files for you.</p>
<p>Preload as many posts as you can and enable “Preload Mode”. Garbage collection of old cached files will be disabled. If you don’t care about sidebar widgets updating often set the preload interval to 2880 minutes (2 days) so all your posts aren’t recached very often. When the preload occurs the cache files for the post being refreshed is deleted and then regenerated. Afterwards a garbage collection of all old files is performed to clean out stale cache files.<br />
Even with preload mode enabled cached files will still be deleted when posts are modified or comments made.</p>
<h3>Development</h3>
<ul>
<li>Active development of this plugin is handled <a href="https://github.com/Automattic/wp-super-cache" rel="nofollow ugc">on GitHub</a>.</li>
<li>Translation of the plugin into different languages is on the <a href="https://translate.wordpress.org/projects/wp-plugins/wp-super-cache" rel="nofollow ugc">translation page</a>.</li>
</ul>
<h3>Documentation</h3>
<p>If you need more information than the following, you can have a look at <a href="https://github.com/Automattic/wp-super-cache/wiki" rel="nofollow ugc">the wiki</a> or the <a href="https://odd.blog/wp-super-cache-developers/" rel="nofollow ugc">Developer documentation</a>.</p>
<h4>Preloading</h4>
<p>You can generate cached files for the posts, categories and tags of your site by preloading. Preloading will visit each page of your site generating a cached page as it goes along, just like any other visitor to the site. Due to the sequential nature of this function, it can take some time to preload a complete site if there are many posts.<br />
To make preloading more effective it can be useful to disable garbage collection so that older cache files are not deleted. This is done by enabling “Preload Mode” in the settings. Be aware however, that pages will go out of date eventually but that updates by submitting comments or editing posts will clear portions of the cache.</p>
<h4>Garbage Collection</h4>
<p>Your cache directory fills up over time, which takes up space on your server. If space is limited or billed by capacity, or if you worry that the cached pages of your site will go stale then garbage collection has to be done. Garbage collection happens on a regular basis and deletes old files in the cache directory. On the advanced settings page you can specify:<br />
1. Cache timeout. How long cache files are considered fresh for. After this time they are stale and can be deleted.<br />
2. Scheduler. Setup how often garbage collection should be done.<br />
3. Notification emails. You can be informed on garbage collection job progress.<br />
There’s no right or wrong settings for garbage collection. It depends on your own site.<br />
If your site gets regular updates, or comments then set the timeout to 1800 seconds, and set the timer to 600 seconds.<br />
If your site is mostly static you can disable garbage collection by entering 0 as the timeout, or use a really large timeout value.</p>
<p>The cache directory, usually wp-content/cache/ is only for temporary files. Do not ever put important files or symlinks to important files or directories in that directory. They will be deleted if the plugin has write access to them.</p>
<h4>CDN</h4>
<p>A Content Delivery Network (CDN) is usually a network of computers situated around the world that will serve the content of your website faster by using servers close to you. Static files like images, Javascript and CSS files can be served through these networks to speed up how fast your site loads. You can also create a “poor man’s CDN” by using a sub domain of your domain to serve static files too.</p>
<p><a href="https://wordpress.org/plugins/ossdl-cdn-off-linker/" rel="ugc">OSSDL CDN off-linker</a> has been integrated into WP Super Cache to provide basic CDN support. It works by rewriting the URLs of files (excluding .php files) in wp-content and wp-includes on your server so they point at a different hostname. Many CDNs support <a href="https://www.google.com/search?hl=en&q=%22origin+pull%22" rel="nofollow ugc">origin pull</a>. This means the CDN will download the file automatically from your server when it’s first requested, and will continue to serve it for a configurable length of time before downloading it again from your server.</p>
<p>Configure this on the “CDN” tab of the plugin settings page. This is an advanced technique and requires a basic understanding of how your webserver or CDNs work. Please be sure to clear the file cache after you configure the CDN.</p>
<h4>REST API</h4>
<p>There are now REST API endpoints for accessing the settings of this plugin. You’ll need to be authenticated as an admin user with permission to view the settings page to use it. This has not been documented yet but you can find all the code that deals with this in the “rest” directory.</p>
<h4>Custom Caching</h4>
<p>It is now possible to hook into the caching process using the add_cacheaction() function.</p>
<p>Three hooks are available:</p>
<ol>
<li>‘wp_cache_get_cookies_values’ – modify the key used by WP Cache.</li>
<li>‘add_cacheaction’ – runs in phase2. Allows a plugin to add WordPress hooks.</li>
<li>‘cache_admin_page’ – runs in the admin page. Use it to modify that page, perhaps by adding new configuration options.</li>
</ol>
<p>There is one regular WordPress filter too. Use the “do_createsupercache” filter<br />
to customize the checks made before caching. The filter accepts one parameter.<br />
The output of WP-Cache’s wp_cache_get_cookies_values() function.</p>
<p>WP Super Cache has its own plugin system, loaded before most of WordPress. Add your own plugin either by putting it in the wp-content/plugins/wp-super-cache-plugins directory, or by calling wpsc_add_plugin( $name ) with the full path to the plugin.</p>
<p>The cookies used to identify “known users” can be modified with wpsc_add_cookie( $name ) and wpsc_delete_cookie( $name ). See <a href="https://github.com/Automattic/wp-super-cache/blob/4cda5c0f2218e40e118232b5bf22d227fb3206b7/plugins/searchengine.php" rel="nofollow ugc">plugins/searchengine.php</a> as an example.</p>
<h3>Troubleshooting</h3>
<p>If things don’t work when you installed the plugin here are a few things to check:</p>
<ol>
<li>Is wp-content writable by the web server?</li>
<li>Is there a wp-content/wp-cache-config.php ? If not, copy the file wp-super-cache/wp-cache-config-sample.php to wp-content/wp-cache-config.php and make sure WPCACHEHOME points at the right place.</li>
<li>Is there a wp-content/advanced-cache.php ? If not, then you must copy wp-super-cache/advanced-cache.php into wp-content/. You must edit the file and change the path so it points at the wp-super-cache folder.</li>
<li>If pages are not cached at all, remove wp-content/advanced-cache.php and recreate it, following the advice above.</li>
<li>
<p>Make sure the following line is in wp-config.php and it is ABOVE the “require_once(ABSPATH.’wp-settings.php’);” line:</p>
<pre><code>define( 'WP_CACHE', true );
</code></pre>
</li>
<li>Try the Settings->WP Super Cache page again and enable cache.</li>
<li>Look in wp-content/cache/supercache/. Are there directories and files there?</li>
<li>Anything in your php error_log?</li>
<li>If your browser keeps asking you to save the file after the super cache is installed you must disable Super Cache compression. Go to the Settings->WP Super Cache page and disable it there.</li>
<li>File locking errors such as “failed to acquire key 0x152b: Permission denied in…” or “Page not cached by WP Super Cache. Could not get mutex lock.” are a sign that you may have to use file locking. Edit wp-content/wp-cache-config.php and uncomment “$use_flock = true” or set $sem_id to a different value. You can also disable file locking from the Admin screen as a last resort.</li>
<li>Make sure cache/wp_cache_mutex.lock is writable by the web server if using coarse file locking.</li>
<li>The cache folder cannot be put on an NFS or Samba or NAS share. It has to be on a local disk. File locking and deleting expired files will not work properly unless the cache folder is on the local machine.</li>
<li>Garbage collection of old cache files won’t work if WordPress can’t find wp-cron.php. Check your access_logs for wp-cron.php entries and that your hostname resolves to the external IP address other servers on the network/Internet use.</li>
<li>If old pages are being served to your visitors via the supercache, you may be missing Apache modules (or their equivalents if you don’t use Apache). 3 modules are required: mod_mime, mod_headers and mod_expires. The last two are especially important for making sure browsers load new versions of existing pages on your site.</li>
<li>The error message, “WP Super Cache is installed but broken. The path to wp-cache-phase1.php in wp-content/advanced-cache.php must be fixed!” appears at the end of every page. Open the file wp-content/advanced-cache.php in your favourite editor. Is the path to wp-cache-phase1.php correct? This file will normally be in wp-content/plugins/wp-super-cache/. If it is not correct the caching engine will not load.</li>
<li>Caching doesn’t work. The timestamp on my blog keeps changing when I reload. Check that the path in your .htaccess rules matches where the supercache directory is. You may have to hardcode it. Try disabling supercache mode.</li>
<li>
<p>If supercache cache files are generated but not served, check the permissions on all your wp-content/cache/supercache folders (and each of wp-content cache and supercache folders) and wp-content/cache/.htaccess. If your PHP runs as a different user to Apache and permissions are strict Apache may not be able to read the PHP generated cache files. To fix you must add the following line to your wp-config.php (Add it above the WP_CACHE define.) Then clear your cache.</p>
<pre><code>umask( 0022 );
</code></pre>
</li>
<li>
<p>If you see garbage in your browser after enabling compression in the plugin, compression may already be enabled in your web server. In Apache you must disable mod_deflate, or in PHP zlib compression may be enabled. You can disable that in three ways. If you have root access, edit your php.ini and find the zlib.output_compression setting and make sure it’s “Off” or add this line to your .htaccess:</p>
<pre><code>php_flag zlib.output_compression off
</code></pre>
<p>If that doesn’t work, add this line to your wp-config.php:</p>
<pre><code>ini_set('zlib.output_compression', 0);
</code></pre>
</li>
<li>After uninstalling, your permalinks may break if you remove the WordPress mod_rewrite rules too. Regenerate those rules by visiting the Settings->Permalink page and saving that form again.</li>
<li>If your blog refuses to load make sure your wp-config.php is correct. Are you missing an opening or closing PHP tag?</li>
<li>Your front page is ok but posts and pages give a 404? Go to Settings->permalinks and click “Save” once you’ve selected a custom permalink structure. You may need to manually update your .htaccess file.</li>
<li>
<p>If certain characters do not appear correctly on your website your server may not be configured correctly. You need to tell visitors what character set is used. Go to Settings->Reading and copy the ‘Encoding for pages and feeds’ value. Edit the .htaccess file with all your Supercache and WordPress rewrite rules and add this at the top, replacing CHARSET with the copied value. (for example, ‘UTF-8’)</p>
<pre><code>AddDefaultCharset CHARSET
</code></pre>
</li>
<li>The error message, “WP Super Cache is installed but broken. The constant WPCACHEHOME must be set in the file wp-config.php and point at the WP Super Cache plugin directory.” appears at the end of every page. You can delete wp-content/advanced-cache.php and reload the plugin settings page or edit wp-config.php and look for WPCACHEHOME and make sure it points at the wp-super-cache folder. This will normally be wp-content/plugins/wp-super-cache/ but you’ll likely need the full path to that file (so it’s easier to let the settings page fix it). If it is not correct the caching engine will not load.</li>
<li>If your server is running into trouble because of the number of semaphores used by the plugin it’s because your users are using file locking which is not recommended (but is needed by a small number of users). You can globally disable file locking by defining the constant WPSC_DISABLE_LOCKING, or defining the constant WPSC_REMOVE_SEMAPHORE so that sem_remove() is called after every page is cached but that seems to cause problems for other processes requesting the same semaphore. Best to disable it.</li>
<li>Set the variable $htaccess_path in wp-config.php or wp-cache-config.php to the path of your global .htaccess if the plugin is looking for that file in the wrong directory. This might happen if you have WordPress installed in an unusual way.</li>
</ol>


WP Super Cache


I've been using this caching plugin since before Automattic took over management. Since I don't get very much in the way of comments on my site, the vast majority of hits are anonymous and don't change what should be on the page next time, so a static cache helps a *lot*.


Major speedup for the typical use case


It is very easy to use and optimally accelerates the website(s). Many thanks for the free version, it's simply brilliant.


Very helpful tool

A very fast caching engine for WordPress that produces static html files.

Ergonet Cache vs WP Super Cache