ffarinas

Español
Glufcopayments es una Pasarela de Pagos por Internet creada por Glufco Investment, esta permite aceptar Criptomonedas como mentodos de pago a cualquier 
tienda WooCommerce en una manera simple pero con alto nivel de seguridad en las transacciones.
Funciona redireccionando al sitio web de GufcoPayments, el usuario necesita iniciar sesion en el sistema Glufco con el 2FA para luego proceder a confirmar 
el pago, luego el usuario retorna a la tienda con el resultado de la operacion y capturando el TXID a su vez que se cambia el status de la orden en WooCommerce.
Este plugin utiliza el servicio de GlufcoPayments creado por Glufco para su funcionamiento.
Puedes obtener mas informacion acerca de este servicio en los siguientes links: 
https://glufco.com 
https://glufco.com/plataforma-de-pagos/ 
https://developers.glufco.com
English
GlufcoPayments is an Internet Payments Gateway made by Glufco Investment, it enables to accept CryptoCurrencies as a payment to any WooCommerce Store 
in a simple way with high security in the transactions.
It functions as a redirect to the site payment, the user needs to log in Glufco System with 2FA to process the payment, and then it returns to the shop 
with the result of the operation and capturing the TXID and also changing the status of the order in WooCommerce.
This plugin uses the GlufcoPayments service created by Glufco in order to work.
You can read more about the service in the following links: 
https://glufco.com 
https://glufco.com/plataforma-de-pagos/ 
https://developers.glufco.com

GlufcoPayments

GLufcoPayments for WooCommerce is a plugin created by Glufco Investment to simplify the eshop using…

unicrow

The plugin makes it easy to integrate Unicrow into a marketplace built on WooCommerce and optionally Dokan. 
It extends WooCommerce and Dokan settings to allow admins to configure its parameters
Overview
There are a few things important to understand before we get into the (very simple) setup.
<h3>About _Unicrow_</h3>
To better grasp the potential that Unicrow brings to marketplace operators, it is good to understand the protocol basics. 
* Unicrow runs on Ethereum’s Layer 2s Arbitrum One and Base and supports ETH and any ERC20 token, e.g. stablecoins like USDT or USDC 
* Each individual escrow has the following parameters: seller (supposed to receive the funds), marketplace (optional, gets a commission), arbitrator (optional, decides a dispute), and what’s the challenge (escrow) period. 
* The Buyer can release funds to the seller at any time 
* Funds can be claimed to the seller after the challenge period ends 
* The Marketplace and/or arbitrator fees will be sent out when the funds are claimed or released from the escrow. 
* Unicrow is immutable and non-custodial 
You can read more details at <a href="https://docs.unicrow.io/docs/introduction/summary" rel="nofollow ugc">docs.unicrow.io</a>. 
The <a href="https://docs.unicrow.io/docs/quick-start/basic-concepts" rel="nofollow ugc">Quick Start</a> section of our documentation website includes useful information for users. Feel free to copy&paste any of the content or refer to it in your marketplace user guides.
<h3>Supported tokens</h3>
The plugin supports ETH, USDC, and USDT on Arbitrum One network. We will extend the support for Base soon and for additional tokens based on feedback and eventually make it easier for admins to add support for any tokens. In the meantime, the admins can extend support in the source code directly (see Advanced Setup below)
Supported functionality
<h3>WooCommerce</h3>
Unicrow plugin extends Wooommerce (WC) in the following ways: 
* It is added to a list of payment methods in WC’s settings and on the checkout page 
* It adds an optional seller address attribute to product settings - this technically allows operating a multi-vendor marketplace even without Dokan, simply by adding different seller address to different products. 
* It adds a link to the transaction in Unicrow web3 app to admin emails and to the order notes.
<h3>Dokan</h3>
The plugin further adds or reuses the following to Dokan settings: 
* It uses Dokan‘s admin commission as a marketplace fee parameter in Unicrow transactions 
* It adds seller address parameter to vendor settings and if set, uses it in the transactions (in that case, setting seller address in product settings or WooCommerce Payment settings is not necessary) 
* It adds to an email sent to the vendor a note with a link to the transaction in Unicrow web3 app
Prerequisites
<h3>WordPress plugins:</h3>
<ul>
<li>WooCommerce is a required and technically sufficient pre-requisite since Unicrow plugin hooks into its functions for setting up and for payment processing.  
While WooCommerce itself doesn’t support multi-vendor setup, Unicrow extends product settings for seller address attribute. 
That means if an admin doesn’t want to complicate things with multiple sellers and an additional plugin such as Dokan, but wants to be able to process payments to different addresses for different products, the combination of WC and Unicrow allows for this.</li>
<li>(Optional) Dokan for full multi-vendor functionality.</li>
</ul>
<h3>Other/Crypto-related prerequisites for different actors:</h3>
<ul>
<li>Marketplace operator
<ul>
<li>A secure wallet able to receive fees (if applicable) on the supported network</li>
<li>An online web3 wallet to provide arbitration service loaded with a little bit bit of ETH to pay for gas costs </li>
<li>(optional) An online web3 wallet that would regularly claim payments to _sellers as a service to them (for simplification it can be done also from the Arbitrator wallet)</li>
</ul>
</li>
<li>Buyer
<ul>
<li>A web3 wallet with sufficient balance to pay the purchase and a little bit of ETH on the supported network</li>
</ul>
</li>
<li>Seller
<ul>
<li>An Ethereum address to receive the supported tokens on the supported network</li>
</ul>
</li>
</ul>
Setting Up
Follow these steps to set up Unicrow with WooCommerce and, optionally, Dokan 
1. Open WordPress Admin Console 
1. Install and activate WooCommerce, Unicrow WooCommerce plugin, and optionally Dokan 
2. Open WooCommerce → Settings → Payments and press Manage next to Unicrow 
3. Enter the values per your preference: 
 * Default Seller Address: If you plan to receive all payments to one address, paste that address here. Leave it empty if you plan to set seller address per product or (in Dokan) per vendor 
 * Marketplace Address: If you plan to collect a commission directly from Unicrow to your wallet, paste its address here. This can be a cold wallet or even an exchange address as long as it supports receiving the tokens you chose on the supported network (currently Arbitrum One TODO: add link to arbitrum guide). 
 * Marketplace Commission: Leave empty if you want the plugin to reuse Dokan commission settings or if you don’t plan to charge a commission. 
 * Challenge Period: How long a buyer can challenge the payment. After this, the seller can claim the payment. 
 * Arbitrator address: An address of a wallet account from which you will resolve disputes. The address should be funded with a little bit of ETH for gas fees and easy to access and make transactions from, e.g. a browser or even a mobile wallet. It won’t hold customer funds at any point so it can be “hot”. 
 * Arbitrator fee: Arbitrator fee in %. If the marketplace operator is an arbitrator too, can leave this at 0. 
 * Accepted tokens: Currently supporting ETH, USDT, USDC. We’d like your feedback which ones we should prioritize and will eventually let you manage a custom list (which you of course can still do by opening the plugin code and editing config.php 🙂 
4. If you use Dokan, you can set seller address per vendor in Users -> All Users -> Edit -> Unicrow Vendor Options
Advanced Setup
Please don’t hesitate to contact us at hello@unicrow.io to suggest improvements, but in the meantime if you want to add some other ERC20 token to the list or switch the plugin to support Base, you can do it by editing the plugin code using a plugin like <a href="https://wordpress.org/plugins/wpide/" rel="ugc">WPIDE</a>: 
* To add a custom ERC20 token, edit config.php 
 * In this case, we’d recommend to edit the description to reflect this too 
* To switch to Base, edit src/class-wc-gateway-unicrow.php and change <code>'chainId' => 42161,</code> to <code>8453</code>
<h3>External services</h3>
The plugin reads ETH price from Coingecko’s public API (api.coingecko.com). 
It also connects to Unicrow’s REST API to create a payment request in Unicrow’s app. Subsequently it redirects a user to the app to pay the re request and uses the provided callback url to send the user back to the confirmation page. 
The data submitted to the REST API are: 
* order price 
* order number 
* buyer, seller, marketplace, and arbitrator ETH addresses 
* marketplace and arbitrator commissions 
* escrow period

Unicrow: Cryptocurrency escrow

Unicrow is a non-custodial escrow protocol for ETH, stablecoins, and other ERC20 tokens. This integrates it into a WooCommerce and optionally Dokan

GlufcoPayments vs Unicrow: Cryptocurrency escrow